EconoFil™ PLA Print Settings

EconoFil™ PLA Printing Temperature: 190°C - 210°C

• EconoFil PLA should be printed with a heated print bed set to 55°C - 60°C
• A good quality glue stick should be used for proper bed adhesion on most bed surfaces.
• If warping or stringing occurs, please lower your printing temperature. EconoFil PLA can printed as low as 185°C if needed.
• If excessive stringing occurs, the materials may need to be dried in a dehydrator.
• First layer nozzle temperature usually 5°C-10°C higher than subsequent layers.